Introducing the absolute best way to organize your ratchet drawer!
Our ratchet holders feature magnets on each side to interconnect with our full line of MagAttach magnetic interconnecting holders. We have also put magnets in the base to prevent them from sliding around when drawers are opened and closed. Each ratchet holder also includes a support, with two base magnets, for the handle side of your ratchet
Dimensions/Fit:
The universal ratchets holders are designed to accommodate 95% of ratchets on the market. We do however recommend you check your ratchets head diameter and compare to the “Inside Width (IW)” defined in the table below (also shown in the dimensions image).
Drive | Length (L) | Width (W) | Height (H) | Inside Width (IW) | Anvil Diameter (AD) | Anvil Depth (AD) |
1/4″ | 1.25 | 1.39 | 0.90 | 1.00 | 0.40 | 0.60 |
3/8″ | 1.50 | 1.67 | 0.90 | 1.28 | 0.65 | 0.60 |
1/2″ | 1.87 | 2.08 | 0.90 | 1.70 | 0.80 | 0.60 |
A three piece set, including 1 of each size, is available here.
Notes:
*3D printed parts do vary slightly from piece to piece.
** Tools shown in images are NOT included. This is for the tray ONLY.
These are awesome. Save a lot of space and holds in place very well
Bought this one for my individual small individual ratchets. Will be buying more.
finish was much better then expected with a 3d print
Very handy and holds ratchets securely. A++
Fit Craftsman USA ratchets and Matco 88 tooth ratchets very well. Did not fit my class pear shaped Proto ratchets. I would purchasing these again!